Description
Crank handles that work with a roll up gear. Comes in 30″ , 96″ , or 120″ lengths.
30″ shown
Crank handles that work with a roll up gear. Comes in 30″ , 96″ , or 120″ lengths.
30″ shown
Options | 120", 24", 30", 96" |
---|
The steel doors that we offer are made from 1 1/2″ square tubing and covered with 8 mil double walled poly carbonate. They come with hinges attached so that they are ready to hang.
The steel doors that we offer are made from 1 1/2″ square tubing and covered with 8 mil double walled poly carbonate. They come with hinges attached so that they are ready to hang.
Double Wall Polycarbonate
ALUMINUM EXTRUSIONS FOR POLYCARBONATE
END BOW WIRE LOCK
Used on end bows. Bends with curve of bow and needs to be
Tex screwed every 12″. Cut polycarbonate to fit curve of bow.
Slip polycarbonate into flange. Roof poly fastens to C-channel
with stainless steel spring wire. 8′ long. Can be UPS or Fed Ex
SINGLE h CHANNEL
Used on ends of polycarbonate sheets. Screw on with Tex if used
on metal or Screw10 if wood end walls. 8′ long. 1 1/2 lb each.
DOUBLE H CHANNEL
Used to join two pieces of polycarbonate together.
Screw to steel side walls with Tex screws or
if attached to wood, use Screw10. 8′ long. 2 lb.
ALUMINUM TAPE
Used to tape bottom holes of polycarbonate to
keep out moisture and insects. 2″ x 150′.
VENT TAPE
Used on top end of polycarbonate to vent heat or moisture.
1 1/2″ x 180′
WHITE FELT TAPE
Used to protect poly from greenhouse bows. 1″ x 48′.
MIGHTY BOND TAPE CLEAR
Used to repair high tunnel curtain, floating row cover, etc..
Made of a woven material. A very sticky tape. 4″ x 50′
ROOF RIDGE 10′ long for the peak of a polycarbonate roof.
Double Wall Polycarbonate
ALUMINUM EXTRUSIONS FOR POLYCARBONATE
END BOW WIRE LOCK
Used on end bows. Bends with curve of bow and needs to be
Tex screwed every 12″. Cut polycarbonate to fit curve of bow.
Slip polycarbonate into flange. Roof poly fastens to C-channel
with stainless steel spring wire. 8′ long. Can be UPS or Fed Ex
SINGLE h CHANNEL
Used on ends of polycarbonate sheets. Screw on with Tex if used
on metal or Screw10 if wood end walls. 8′ long. 1 1/2 lb each.
DOUBLE H CHANNEL
Used to join two pieces of polycarbonate together.
Screw to steel side walls with Tex screws or
if attached to wood, use Screw10. 8′ long. 2 lb.
ALUMINUM TAPE
Used to tape bottom holes of polycarbonate to
keep out moisture and insects. 2″ x 150′.
VENT TAPE
Used on top end of polycarbonate to vent heat or moisture.
1 1/2″ x 180′
WHITE FELT TAPE
Used to protect poly from greenhouse bows. 1″ x 48′.
MIGHTY BOND TAPE CLEAR
Used to repair high tunnel curtain, floating row cover, etc..
Made of a woven material. A very sticky tape. 4″ x 50′
ROOF RIDGE 10′ long for the peak of a polycarbonate roof.
KOOL RAYTM
Super concentrated liquid shade. Kool Ray
is specifically designed to lower inside greenhouse
or high tunnel temperature during the warmer spring and
summer months. Environmentally friendly ingredients will
slowly wear off, allowing for increase light levels as the daylight
decreases. Mix 1 to 8 with water. Spray, brush or roll on.
KOOL RAYTM
Super concentrated liquid shade. Kool Ray
is specifically designed to lower inside greenhouse
or high tunnel temperature during the warmer spring and
summer months. Environmentally friendly ingredients will
slowly wear off, allowing for increase light levels as the daylight
decreases. Mix 1 to 8 with water. Spray, brush or roll on.
A rugged, clear, patching tape for preventive maintenance in areas of extra stress or mending. Lasts up to 2 yrs. Comes in 4 widths. 2″ 4″ 6″ 10″
A rugged, clear, patching tape for preventive maintenance in areas of extra stress or mending. Lasts up to 2 yrs. Comes in 4 widths. 2″ 4″ 6″ 10″
Reviews
There are no reviews yet.