Additional information
| Weight | N/A |
|---|---|
| Sizes | 1 1/2", 1 1/4", 1", 1/2", 1/4", 2", 3/4", 3/8" |
| Type | vinyl tubing, EDPM rubber hose, Braided, Mazzi |
Related Products
Drip Tape Fittings
176 Goof plug for layflat where #290 or #1380 when removed
189 Drip lock repair coupling with valve.
218 .250 barb X drip lock. Up to 300′ of drip. Use punch # 991
244 .420 guff plug. Used to plug holes of 296 or 1014.
290 Layflat X drip lock. Use with punch # 1000
296 .420 barb X drip lock. Up to 600′ drip. Use punch # 764.
298 0.400 grommet. Drill 5/8″ in 1″ pvc to use # 296 or # 1014.
315 Drip tape end closures
356 Drip lock ell.
379 Drip lock tee.
420 Drip lock repair coupler. Green & Black Irritec.
420B Drip lock repair coupling. Orange & black Jain irrigation
426 Goof plug to plug .250 holes. 10 plugs per pack.
438 1/2″ inside/3/4″ outside foe PVC pipe to drip lock
832 .250 (1/4″) barb X drip lock with valve. Use punch # 991.
859 Female garden hose X drip lock.
988 Male garden hose X drip lock.
1014 .420 barb X drip lock with valve. Use punch # 764.
1380 Layflat X drip lock with valve. Use punch # 1000-2
1381 Auto flush valve. Use with # 988 at end of drip line.
1678 Layflat X 1/2″ID/3/4″OD pipe thread. Use punch #1000-2
597 Drip line patching tape. Used to patch small holes in DL.
Layflat goof plug
Drip tape end closures
Ā Ā Ā Ā Ā Ā Ā Ā Punches for drip lock fittings.
764 Punches .420 hole. Use with fitting # 296 or 1014Ā First Punch
764-2 Punches .420 hole. Heavy duty. Use with fitting # 296 or 1014 Blue punch
764-3 Replacement tip for # 764-2
991 Punches 1/8″ hole. To be used with # 218 or # 832 fittingĀ T punch
1000 Punches 19 mm hole (blue) for fittings # 290 Last punch
1000-2 Punches 14 mm hole (orange) for fitting # 1380 & 1678.
176 Goof plug for layflat where #290 or #1380 when removed
189 Drip lock repair coupling with valve.
218 .250 barb X drip lock. Up to 300′ of drip. Use punch # 991
244 .420 guff plug. Used to plug holes of 296 or 1014.
290 Layflat X drip lock. Use with punch # 1000
296 .420 barb X drip lock. Up to 600′ drip. Use punch # 764.
298 0.400 grommet. Drill 5/8″ in 1″ pvc to use # 296 or # 1014.
315 Drip tape end closures
356 Drip lock ell.
379 Drip lock tee.
420 Drip lock repair coupler. Green & Black Irritec.
420B Drip lock repair coupling. Orange & black Jain irrigation
426 Goof plug to plug .250 holes. 10 plugs per pack.
438 1/2″ inside/3/4″ outside foe PVC pipe to drip lock
832 .250 (1/4″) barb X drip lock with valve. Use punch # 991.
859 Female garden hose X drip lock.
988 Male garden hose X drip lock.
1014 .420 barb X drip lock with valve. Use punch # 764.
1380 Layflat X drip lock with valve. Use punch # 1000-2
1381 Auto flush valve. Use with # 988 at end of drip line.
1678 Layflat X 1/2″ID/3/4″OD pipe thread. Use punch #1000-2
597 Drip line patching tape. Used to patch small holes in DL.
Layflat goof plug
Drip tape end closures
Ā Ā Ā Ā Ā Ā Ā Ā Punches for drip lock fittings.
764 Punches .420 hole. Use with fitting # 296 or 1014Ā First Punch
764-2 Punches .420 hole. Heavy duty. Use with fitting # 296 or 1014 Blue punch
764-3 Replacement tip for # 764-2
991 Punches 1/8″ hole. To be used with # 218 or # 832 fittingĀ T punch
1000 Punches 19 mm hole (blue) for fittings # 290 Last punch
1000-2 Punches 14 mm hole (orange) for fitting # 1380 & 1678.
Filters
Y TYPE FILTERS
This is a more economically priced filter. It is not a spin clean filter. Parts will not inter change with spin clean filter.
SPIN CLEAN FILTERS
All have male pipe threads. Each filter has a flush valve for ease of cleaning by just opening valve. Two piece threaded housing with O-ring seal, molded from high heat & chemical resistant glass reinforced plastic. Stainless steel 150 mesh screen.
SAND FILTERS
Clean water is a must with drip irrigation. When using pond, river, stream or lake water a sand filter is a must. Back flush valve assembly included on TA40 & TA60 models. TR100 you need to buy back flush valve assembly. You will need sand & gravel for each filter.
Y TYPE FILTERS
This is a more economically priced filter. It is not a spin clean filter. Parts will not inter change with spin clean filter.
SPIN CLEAN FILTERS
All have male pipe threads. Each filter has a flush valve for ease of cleaning by just opening valve. Two piece threaded housing with O-ring seal, molded from high heat & chemical resistant glass reinforced plastic. Stainless steel 150 mesh screen.
SAND FILTERS
Clean water is a must with drip irrigation. When using pond, river, stream or lake water a sand filter is a must. Back flush valve assembly included on TA40 & TA60 models. TR100 you need to buy back flush valve assembly. You will need sand & gravel for each filter.
Layflat
This is a lightweight, tough and economical
priced water discharge hose great for mains
or as header lines. It will not rot or mildew and
coils flat for easy storage. Max. PSI: 75.
This is a lightweight, tough and economical
priced water discharge hose great for mains
or as header lines. It will not rot or mildew and
coils flat for easy storage. Max. PSI: 75.
Reviews
There are no reviews yet.